plugs into the terminals with corresponding colors. Do one of the following, depending on the inputs on your television: Connect the Video Out jack on your HTS to the Video In or Composite (AV) Video In jack on your. Connect the S-Video Out jack on your HTS to the S-Video In jack on your. Connect your DVD player by plugging in the audio/video input jacks. Plug in the power cords and turn on all the components. The colors on the plugs correspond to the colors in the TV terminals. Check that the clock is set correctly. A diagram illustrating the three kinds of video connections is below. Important: If you have a high definition (hdtv) satellite receiver or digital cable box and you want to view the high definition output, you should connect the video output of the receiver or the box directly to your TV using the component (Pr, Pb, and Y).
V shows or movies for viewing at a more convenient time.
Hooking up a DirecTV satellite receiver to a TV with a DVD player and VCR requires a television with at least two sets of audio/video input jacks.
Can I bypass Direct TV and hook DVD player to Samsung TV?
Yes, simply plug it into one of the other hdmi ports on your tv and then switch.
In this FAQ, we'll explain how to hook up your Home Theater System to your satellite receiver or digital cable box using a variety of cable types. Connect the Component Video Out jacks on your receiver or box (Pr, Pb, and Y) to the corresponding Component Video In jacks on your HTS. By connected the DVD directly to the TV with a separate set of jacks, the TV remote control can toggle between playback of DVDs, videotapes or watching satellite programming. After you have hooked your receiver or box directly to your TV, perform only Step 2 in the procedure below.
Connect the third set of composite cables from the DVD player's AV Out jacks to another set of input jacks on the. Hooking Up Your Home Theater System To A Satellite Receiver. By James Clark ; Updated February 10, 2017. Turn off the power hdmi hookup for macbook pro to your. How to Connect a VCR to a TV With a Converter Box. Make sure you connect the left cable to the left jack and right cable to the right jack. Do one of the following: Connect the Audio Out jacks on your receiver or box to either the AUX 1 or AUX 2 Audio Input jacks in the AUX In area on your HTS. Plug the other end of the cord into the terminals on the DVD player marked. Plug one end of the three-pronged cord that came with the DVD player into the terminals on the TV marked. Placing the DVD on top of your TV may cause overheating source: Fleischmann.